Find Problem Batteries In Your Telecom Battery
System
 BTECH’s
S5 Series Battery Monitoring and Validation System has been designed
specifically for your Telecom 48 VDC battery systems.
Our patented and proven impedance measurement technology has the
sensitivity required to find failing cells well before they pose
a risk.
Plus, with battery sensing harnesses pre-designed and tested for
your battery system, installation time is cut in half while increasing
system reliability.
Why BTECH Is The World Leader In Battery Monitoring
We’re Proven: Over 4000 Systems Installed Worldwide
We’re Superior: BTECH’s patented impedance method
provides rock solid data accuracy and stability, allowing more time
to respond - no other system comes close.
We’re Non-Destructive: With a load signal optimized
to the battery type, our system never subjects your batteries to
a stressful load test. Additionally, our system is not powered by
your batteries.
We Know Your Batteries: With more experience than anyone
in the business, our sales and service staff is there for you when
you have questions.
Key System Features
 BTECH
Monitors Key Battery Parameters in Real Time: System Voltage,
Float, Charge and Discharge Current, plus ambient and pilot cell
temperatures
- Impedance measurement spec of 0.1 +/- 0.01 mOhm - the sensitivity
required for flooded cells.
- Programmable Test & Out-of-Limits Alarms
- Battery Discharge Data Logging
- Up to 480 Individual Cells and 4 Strings per system
- Individual String Current Monitoring for multi-string systems
- Complete Isolation from the Battery String
- No PC Required
- Powered by the +48VDC Charger - No AC Power Required
Facility Management System Integration
- MODBUS over TCP/IP for simple third-party software integration
- (6) User-configurable Dry Contact Alarms
Alarm and Data Acquisition Options
- Local: RS-232 and USB
- Remote: 56k Modem and Integral Ethernet
- Alarms: Text Message to multiple cell phones, pagers or e-mail
addresses, through BVM Software or FMS integration
Safety
- BTECH Quick-Disconnect Safety Fuses simplify battery replacements
while protecting personnel during installation and maintenance
System Specifications
|
Measurement
Capability:
- Total Voltage: 0-600V
- Total Number Strings: 4
- Unit Voltage: 1-16 VDC
Unit Impedance 100µW to 20mW
Temperature - Unit and Ambient: -32°F to 160°F
Discharge Events:
- Date & Time
- System Voltage
- Load Current
- Power Removed
Discharge Logging: Programmable
Connection Capacity:
- Total Connection Points: 480
- Total Number of Parallel Strings: 4
Measurement Accuracy & Repeatability:
- System Voltage: +/ -0.1% Full Scale
- Unit Voltage: +/ -0.1% of Reading
- Unit Impedance: +/ -0.01 mW
- Temperature: +/ -1.0°F
|
Power
Requirements:
-110-250 VAC (UPS Protected Power)
Enclosure:
- Controller: Metal, Rack or Wall Mount
- 24 Unit DCM: Flame Retardant Poly
LED Indicators - VM24 DCM:
- Green = Power On
LED Indicators - SCM600 Controller:
- Green = Summary No Alarms
- Yellow = Summary Maintenance Alarms
- Red = Summary Critical Alarms
- Red Equipment = Module not Communicating
- Alternating Green = Performing Measurement
Software:
- BVM 4.1 Windows® based software package designed for
Windows® XP and higher
CE Mark
|
Add your name to our long list of satisfied
clients and
request
a quote, or contact us
for more information today!
- "Since their installation
we have not had one battery related outage..." -
“In 1995 we purchased the BTECH monitoring system for each
of 5 UPS units with more than 300 batteries in the system for our
corporate offices. Since their installation we have not had one
battery related outage of an operating UPS unit.
The BTECH system has fore warned of more than 30 potential battery
failures allowing us to replace batteries before they fail...The
only way to know how your batteries are performing is to monitor
their performance on weekly basis. BTECH has provided flawless service
in maintaining our battery back-up systems.” Ken Rheault,
Consumers Energy
- "Proven to greatly reduce
battery maintenance costs..." -
“BTECH’s Battery Monitoring Systems have proven to greatly
reduce battery maintenance costs, extend the life of the batteries
and virtually eliminate battery failure by being able to
predict precisely which cells need to be replaced in advance.
Based on our experience, I highly recommend BTECH Battery Monitoring
Systems”
S. Alim, Manager of Engineering, ADP
 GSA
Contract # GS-07F-5819P
|
